Fiber proof testers are created to apply a set load to Optical Fiber Ribbon Machine in order to check the effectiveness of the spliced Fiber. Our Fiber proof testers can be found in both linear and rotary styles, for both proof and tension screening. Fiber proof testers are accessible for solitary setting, multimode, and polarization-maintaining fibers. Pick from dedicated, stand alone techniques or multipurpose styles which are also competent at stripping, cleansing, cleaving, splicing, and recoating.
Fiber Recoaters with Proof Testers offer easy, incorporated methods to recoat and test fusion-spliced materials. The Fiber recoating procedure restores the buffer coating to your removed Fiber, providing more flexibility compared to a warmth-reduce safety sleeve, allowing it to be dealt with and coiled with no damage to the fusion-spliced area. The integrated linear or rotary Proof tester allows users to immediately check a recoated Fiber with a pre-decided weight and find out the long-term reliability of the Fiber. Due to their ability to recover a fusion-spliced Fiber to close to initial problem, these techniques are ideal for applications like undersea optical Fiber wires, submarine interaction wiring, Fiber lasers, or Distributed Bragg Reflector (DBR) lasers.
The process begins with the fusion-spliced part of Fiber becoming placed in the middle of the mold assembly (see image towards the right). As soon as set in position, inserts in the Fiber blocks safe the spliced Fiber in position. Recoat materials is motivated to the cavity and after that UV-treated. The recoated Fiber can then be tested by tugging on it up to and including pre-decided weight.
Recoater and Mold Assembly Options – Recoaters are available with either an automated or handbook mold assembly. The automated mold set up functions pneumatic charge of the mold dishes and is optimized for top-volume manufacturing applications. Manual mold assemblies, on the other hand, use easy-to-open mold plates which provide much more versatility and are ideal for reduced-volume production or R&D programs. A computerized or handbook volumetric dispensing pump and shot system is utilized to inject the recoat materials to the mold cavity.
The Optical Fiber Ribbon Machine comes standard with a mold set up for Ø430 µm coated fibers; For your manual recoaters (Item #s PTR206, PTR206B, PTR307, and PTR307B), the mold set up comes individually in order that clients can select the right mold covering diameter for his or her program. Custom mold coating sizes are available as much as Ø900 µm. Pre-installing of the mold assembly on the factory is also available. Contact Technology Support to learn more about custom molds or factory assembly.
We provide you with both high-index (Product # AB950200) and reduced-directory (Item # PC373) recoat components to be used within these recoaters. Recoaters with manual shot pumps (Item #s PTR206B and PTR307B) are appropriate for each types of recoat material; all other recoaters are compatible with the high-directory materials only. Our manual recoaters with the automated shot system (Product #s PTR206 and PTR307) can be personalized to work with both the low- and-index recoat materials; make sure you contact Technology Support for additional information.
Proof Tester Choices – The PTR206, PTR206B, and PTR208 Fiber Recoaters have a built-in linear Proof tester, that can take the Fiber up to and including predetermined load (20 N) then releases it. The linear Proof tester utilizes the identical Fiber keeping blocks because the recoater and thus the Fiber will not need to be relocated prior to screening. The PTR307 and PTR307B Fiber Recoaters include an integrated rotary Proof tester, which can perform each Proof and tension assessments (?89 N). One set of Proof check grips is provided; replacement Proof test grips can be found listed below in packs of 10. Every screening process is fully programmable through the included handset or tablet control, allowing qyjflh consumer to select guidelines including the weight, the pace in which the load is used, and also the hold time.
Inserts for Fiber Keeping Blocks – In addition to the previously mentioned, we provide you with a variety of inserts to use in the Fiber keeping obstructs of the recoaters in order to back up a wide range of Fiber Drawing Machine coating diameters. For recoaters using a rotary Proof tester, the inserts are suitable for Fiber covering diameters in a range from 125 µm to 900 µm. For recoaters using a linear Proof tester, the inserts cover a range for Fiber films from Ø250 µm to Ø900 µm.